|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
600V APT150GN60LDQ4(G) Utilizing the latest Field Stop and Trench Gate technologies, these IGBT's have ultra low VCE(ON) and are ideal for low frequency applications that require absolute minimum conduction loss. Easy paralleling is a result of very tight parameter distribution and a slightly positive VCE(ON) temperature coefficient. A built-in gate resistor ensures extremely reliable operation, even in the event of a short circuit fault. Low gate charge simplifies gate drive design and minimizes losses. * 600V Field Stop * Trench Gate: Low VCE(on) * Easy Paralleling * Intergrated Gate Resistor: Low EMI, High Reliability APT150GN60LDQ4(G) Applications: Welding, Inductive Heating, Solar Inverters, SMPS, Motor drives, UPS MAXIMUM RATINGS Symbol VCES VGE I C1 I C2 I CM SSOA PD TJ,TSTG TL Parameter Collector-Emitter Voltage Gate-Emitter Voltage Continuous Collector Current @ TC = 25C Continuous Collector Current @ TC = 110C Pulsed Collector Current 2 1 All Ratings: TC = 25C unless otherwise specified. APT150GN60LDQ4(G) UNIT Volts 600 30 220 123 450 450A @ 600V 536 -55 to 175 300 Amps Switching Safe Operating Area @ TJ = 175C Total Power Dissipation Operating and Storage Junction Temperature Range Max. Lead Temp. for Soldering: 0.063" from Case for 10 Sec. Watts C STATIC ELECTRICAL CHARACTERISTICS Symbol V(BR)CES VGE(TH) VCE(ON) Characteristic / Test Conditions Collector-Emitter Breakdown Voltage (VGE = 0V, I C = 4mA) Gate Threshold Voltage (VCE = VGE, I C = 2400A, Tj = 25C) MIN TYP MAX Units 600 5.0 1.05 5.8 1.45 1.65 75 3 6.5 1.85 Volts Collector-Emitter On Voltage (VGE = 15V, I C = 150A, Tj = 25C) Collector-Emitter On Voltage (VGE = 15V, I C = 150A, Tj = 125C) Collector Cut-off Current (VCE = 600V, VGE = 0V, Tj = 25C) 3 I CES I GES RG(int) A nA 10-2008 050-7633 Rev A Collector Cut-off Current (VCE = 600V, VGE = 0V, Tj = 125C) Gate-Emitter Leakage Current (VGE = 20V) Intergrated Gate Resistor 2000 600 2 CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. Microsemi Website - http://www.microsemi.com Typical Performance Curves Symbol Cies Coes Cres VGEP Qg Qge Qgc SSOA td(on) tr td(off) tf Eon1 Eon2 Eoff td(on) tr td(off) tf Eon1 Eon2 Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate-to-Emitter Plateau Voltage Total Gate Charge 4 APT150GN60LDQ4(G) Test Conditions Capacitance VGE = 0V, VCE = 25V f = 1 MHz Gate Charge VGE = 15V VCE = 300V I C = 150A TJ = 175C, R G = 4.3 8, VGE = 15V, L = 100H,VCE = 600V Inductive Switching (25C) VCC = 400V VGE = 15V I C = 150A 5 6 MIN TYP MAX UNIT 9200 350 300 9.5 970 65 510 450 44 110 430 60 8810 8615 4295 44 110 480 95 8880 9735 5460 J ns ns A nC V pF Gate-Emitter Charge Gate-Collector ("Miller ") Charge Switching Safe Operating Area Turn-on Delay Time Current Rise Time Turn-off Delay Time Current Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Delay Time Current Rise Time Turn-off Delay Time Current Fall Time Turn-on Switching Energy Turn-off Switching Energy 54 65 RG = 1.0 8 TJ = +25C Turn-on Switching Energy (Diode) 7 J Inductive Switching (125C) VCC = 400V VGE = 15V I C = 150A RG = 1.0 8 TJ = +125C Turn-on Switching Energy (Diode) 67 THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions R R JC JC Min 2500 - Typ - Max 0.28 .30 Unit C/W Junction to Case (IGBT) Junction to Case (DIODE) RMS Voltage (50-60Hz Sinsoidal Waveform from Terminals to Mounting Base for 1 Min.) Package Weight VIsolation WT 6.1 - gm 1 Continuous current limited by case temperature. 2 Repetitive Rating: Pulse width limited by maximum junction temperature. 3 For Combi devices, Ices includes both IGBT and FRED leakages 4 See MIL-STD-750 Method 3471. 10-2008 Rev A 050-7633 5 Eon1 is the clamped inductive turn-on energy of the IGBT only, without the effect of a commutating diode reverse recovery current adding to the IGBT turn-on loss. Tested in inductive switching test circuit shown in figure 21, but with a Silicon Carbide diode. 6 Eon2 is the clamped inductive turn-on energy that includes a commutating diode reverse recovery current in the IGBT turn-on switching loss. (See Figures 21, 22.) 7 Eoff is the clamped inductive turn-off energy measured in accordance with JEDEC standard JESD24-1. (See Figures 21, 23.) 8 RG is external gate resistance, not including RG(int) nor gate driver impedance. (MIC4452) Microsemi Reserves the right to change, without notice, the specifications and information contained herein. Typical Performance Curves 350 300 TJ = 25C 250 TJ = 125C 200 TJ = 175C 150 100 50 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VCE, COLLECTER-TO-EMITTER VOLTAGE (V) 250s PULSE TEST<0.5 % DUTY CYCLE V GE APT150GN60LDQ4(G) 400 12, 13 &15V 11V = 15V TJ = -55C IC, COLLECTOR CURRENT (A) 350 300 250 200 150 100 50 0 IC, COLLECTOR CURRENT (A) 10V 9V 8V 7V 0 5 10 15 20 25 30 VCE, COLLECTER-TO-EMITTER VOLTAGE (V) FIGURE 1, Output Characteristics(TJ = 25C) 350 300 250 200 150 100 50 0 0 2 4 6 8 10 12 14 VGE, GATE-TO-EMITTER VOLTAGE (V) FIGURE 3, Transfer Characteristics VCE, COLLECTOR-TO-EMITTER VOLTAGE (V) TJ = 25C. 250s PULSE TEST <0.5 % DUTY CYCLE FIGURE 2, Output Characteristics (TJ = 125C) 16 VGE, GATE-TO-EMITTER VOLTAGE (V) 14 12 10 8 6 4 2 0 0 200 400 600 800 1000 GATE CHARGE (nC) FIGURE 4, Gate Charge VCE, COLLECTOR-TO-EMITTER VOLTAGE (V) 3.0 2.5 2.0 IC = 150A 1.5 1.0 0.5 0 IC = 75A 1200 I = 150A C T = 25C J IC, COLLECTOR CURRENT (A) TJ = -55C TJ = 25C TJ = 125C TJ = 175C VCE = 120V VCE = 300V VCE = 480V 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 IC = 300A IC = 300A IC = 150A IC = 75A VGE = 15V. 250s PULSE TEST <0.5 % DUTY CYCLE 10 12 14 16 VGE, GATE-TO-EMITTER VOLTAGE (V) FIGURE 5, On State Voltage vs Gate-to- Emitter Voltage 1.15 0 8 25 50 75 100 125 150 175 TJ, Junction Temperature (C) FIGURE 6, On State Voltage vs Junction Temperature 300 0 IC, DC COLLECTOR CURRENT(A) 1.10 VGS(TH), THRESHOLD VOLTAGE (NORMALIZED) 1.05 1.00 0.95 0.90 0.85 0.80 0.75 250 200 150 10-2008 050-7633 Rev A 100 50 0 -50 -25 0.70 -50 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 7, Threshold Voltage vs. Junction Temperature 0 25 50 75 100 125 150 175 TC, CASE TEMPERATURE (C) FIGURE 8, DC Collector Current vs Case Temperature Typical Performance Curves 60 50 VGE = 15V 40 30 20 10 T = 25C, or 125C J 30 70 110 150 190 230 270 310 ICE, COLLECTOR TO EMITTER CURRENT (A) FIGURE 9, Turn-On Delay Time vs Collector Current 400 350 300 tr, RISE TIME (ns) 250 200 150 100 50 30 70 110 150 190 230 270 310 ICE, COLLECTOR TO EMITTER CURRENT (A) FIGURE 11, Current Rise Time vs Collector Current 40,000 EON2, TURN ON ENERGY LOSS (J) 35,000 30,000 25,000 20,000 15,000 10,000 5,000 0 TJ = 25C TJ = 125C V = 400V CE V = +15V GE R = 1.0 G APT150GN60LDQ4(G) 600 td (OFF), TURN-OFF DELAY TIME (ns) 500 400 VGE =15V,TJ=125C td(ON), TURN-ON DELAY TIME (ns) 300 200 100 VCE = 400V RG = 1.0 VGE =15V,TJ=25C VCE = 400V RG = 1.0 L = 100H 0 30 70 110 150 190 230 270 310 ICE, COLLECTOR TO EMITTER CURRENT (A) FIGURE 10, Turn-Off Delay Time vs Collector Current 180 160 140 tf, FALL TIME (ns) TJ = 125C, VGE = 15V 0 L = 100H RG = 1.0, L = 100H, VCE = 400V TJ = 25 or 125C,VGE = 15V 120 100 80 60 40 20 0 TJ = 25C, VGE = 15V 0 RG = 1.0, L = 100H, VCE = 400V 30 70 110 150 190 230 270 310 ICE, COLLECTOR TO EMITTER CURRENT (A) FIGURE 12, Current Fall Time vs Collector Current 18,000 EOFF, TURN OFF ENERGY LOSS (J) 16,000 14,000 12,000 10,000 8,000 6,000 4,000 2,000 0 TJ = 25C TJ = 125C V = 400V CE V = +15V GE R = 1.0 G 30 70 110 150 190 230 270 310 ICE, COLLECTOR TO EMITTER CURRENT (A) FIGURE 13, Turn-On Energy Loss vs Collector Current 70,000 SWITCHING ENERGY LOSSES (J) 60,000 50,000 40,000 30,000 20,000 10,000 0 0 Eoff,300A Eon2,150A Eon2,75A Eoff,75A Eoff,150A V = 400V CE V = +15V GE T = 125C J 30 70 110 150 190 230 270 310 ICE, COLLECTOR TO EMITTER CURRENT (A) FIGURE 14, Turn Off Energy Loss vs Collector Current 40,000 SWITCHING ENERGY LOSSES (J) 35,000 30,000 25,000 20,000 15,000 10,000 5,000 0 0 Eoff,150A Eoff,75A Eon2,150A V = 400V CE V = +15V GE R = 1.0 G Eon2,300A Eon2,300A Eoff,300A 10-2008 Rev A Eon2,75A 050-7633 5 10 15 20 RG, GATE RESISTANCE (OHMS) FIGURE 15, Switching Energy Losses vs. Gate Resistance 25 50 75 100 125 TJ, JUNCTION TEMPERATURE (C) FIGURE 16, Switching Energy Losses vs Junction Temperature Typical Performance Curves 20,000 10,000 C, CAPACITANCE ( F) 500 Cies IC, COLLECTOR CURRENT (A) 500 APT150GN60LDQ4(G) 400 P 300 100 50 Coes Cres 10 0 10 20 30 40 50 VCE, COLLECTOR-TO-EMITTER VOLTAGE (VOLTS) Figure 17, Capacitance vs Collector-To-Emitter Voltage 200 100 100 200 300 400 500 600 700 VCE, COLLECTOR TO EMITTER VOLTAGE Figure 18,Minimim Switching Safe Operating Area 0 0 0.30 D = 0.9 ZJC, THERMAL IMPEDANCE (C/W) 0.25 0.20 0.7 0.15 0.5 Note: 0.3 PDM 0.10 t1 t2 0.05 0 0.1 0.05 10-5 10-4 SINGLE PULSE Duty Factor D = 1/t2 Peak TJ = PDM x ZJC + TC t 10-3 10-2 10-1 RECTANGULAR PULSE DURATION (SECONDS) Figure 19a, Maximum Effective Transient Thermal Impedance, Junction-To-Case vs Pulse Duration 1.0 50 FMAX, OPERATING FREQUENCY (kHz) RC MODEL Junction temp. (C) 0.0964 Power (watts) 0.184 Case temperature. (C) 0.300 0.00770 10 5 T = 125C J T = 75C C D = 50 % = 400V V CE R = 1.0 G F max = min (f max, f max2) 0.05 f max1 = t d(on) + tr + td(off) + tf f max2 = Pdiss = Pdiss - P cond E on2 + E off TJ - T C R JC FIGURE 19b, TRANSIENT THERMAL IMPEDANCE MODEL 70 90 110 130 150 170 190 IC, COLLECTOR CURRENT (A) Figure 20, Operating Frequency vs Collector Current 1 30 50 050-7633 Rev A 10-2008 APT150GN60LDQ4(G) APT100DQ60 10% td(on) tr Gate Voltage TJ = 125C Collector Current 90% V CC IC V CE 5% 10% 5% Collector Voltage A Switching Energy D.U.T. Figure 21, Inductive Switching Test Circuit Figure 22, Turn-on Switching Waveforms and Definitions 90% Gate Voltage td(off) 90% Collector Voltage 10% TJ = 125C tf 0 Collector Current Switching Energy Figure 23, Turn-off Switching Waveforms and Definitions 050-7633 Rev A 10-2008 ULTRAFAST SOFT RECOVERY ANTI-PARALLEL DIODE MAXIMUM RATINGS Symbol IF(AV) IF(RMS) IFSM Symbol Characteristic / Test Conditions Maximum Average Forward Current (TC = 103C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45C, 8.3ms) Characteristic / Test Conditions IF = 120A VF Forward Voltage IF = 240A IF = 120A, TJ = 125C MIN All Ratings: TC = 25C unless otherwise specified. APT150GN60LDQ4(G) UNIT 120 188 600 TYP MAX UNIT Amps STATIC ELECTRICAL CHARACTERISTICS 2.00 2.44 1.70 Volts DYNAMIC CHARACTERISTICS Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Reverse Recovery Time Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current 0.35 Z JC, THERMAL IMPEDANCE (C/W) 0.30 D = 0.9 0.25 0.7 0.20 0.15 0.10 0.05 0 0.5 Note: Test Conditions IF = 1A, diF/dt = -100A/s, VR = 30V, TJ = 25C IF = 120A, diF/dt = -200A/s VR = 400V, TC = 25C MIN - TYP 34 MAX UNIT ns IF = 120A, diF/dt = -200A/s VR = 400V, TC = 125C 47.3 113 4 143 923 11 99 2631 45 nC Amps ns nC Amps ns nC Amps - IF = 120A, diF/dt = -1000A/s VR = 400V, TC = 125C - PDM t1 t2 0.3 0.1 0.05 10-5 10-4 SINGLE PULSE Duty Factor D = 1/t2 Peak TJ = PDM x ZJC + TC t 1.0 10-3 10-2 10-1 RECTANGULAR PULSE DURATION (seconds) FIGURE 24a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION TJ (C) TC (C) Dissipated Power (Watts) FIGURE 24b, TRANSIENT THERMAL IMPEDANCE MODEL 050-7633 Rev A .01168 .13207 ZEXT .1174 .1924 ZEXT are the external thermal impedances: Case to sink, sink to ambient, etc. Set to zero when modeling only the case to junction. 10-2008 DYNAMIC CHARACTERISTICS 300 trr, REVERSE RECOVERY TIME (ns) TJ = 25C 300 T =125C J V =400V R APT150GN60LDQ4(G) 250 IF, FORWARD CURRENT (A) 250 200A 100A 50A 200 TJ = 175C 150 TJ = 125C 100 200 150 100 50 TJ = -55C 0 0.5 1.0 1.5 2.0 2.5 3.0 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 25. Forward Current vs. Forward Voltage T =125C J V =400V R 50 0 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/s) Figure 26. Reverse Recovery Time vs. Current Rate of Change 60 IRRM, REVERSE RECOVERY CURRENT (A) T =125C J V =400V R 4000 Qrr, REVERSE RECOVERY CHARGE (nC) 3500 3000 2500 2000 50A 1500 1000 500 0 100A 200A 200A 50 40 100A 30 50A 20 10 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/s) Figure 27. Reverse Recovery Charge vs. Current Rate of Change 1.2 Kf, DYNAMIC PARAMETERS (Normalized to 1000A/s) Qrr trr trr IRRM 0.6 Qrr 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/s) Figure 28. Reverse Recovery Current vs. Current Rate of Change 180 160 140 Duty cycle = 0.5 T =175C J 1.0 0.8 120 IF(AV) (A) 100 80 60 40 0.4 0.2 20 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) Figure 29. Dynamic Parameters vs. Junction Temperature 1400 CJ, JUNCTION CAPACITANCE (pF) 1200 1000 800 600 400 200 0 0.0 0 75 100 125 150 175 Case Temperature (C) Figure 30. Maximum Average Forward Current vs. CaseTemperature 0 25 50 Rev A 10-2008 050-7633 10 100 200 VR, REVERSE VOLTAGE (V) Figure 31. Junction Capacitance vs. Reverse Voltage 1 APT150GN60LDQ4(G) Vr +18V 0V D.U.T. 30H trr/Qrr Waveform diF /dt Adjust PEARSON 2878 CURRENT TRANSFORMER Figure 32. Diode Test Circuit 1 2 3 4 IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero 1 4 5 3 2 0.25 IRRM trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr. 5 Figure 33, Diode Reverse Recovery Waveform and Definitions TO-264 (L) Package Outline 4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.79 (.228) 6.20 (.244) Collector Cathode 25.48 (1.003) 26.49 (1.043) 2.29 (.090) 2.69 (.106) 19.81 (.780) 21.39 (.842) 2.29 (.090) 2.69 (.106) Gate Collector / Cathode Emitter / Anode 0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118) 0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125) 5.45 (.215) BSC 2-Plcs. Microsemi's products are covered by one or more of U.S. patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 6,939,743, 7,352,045 5,283,201 5,801,417 5,648,283 7,196,634 6,664,594 7,157,886 6,939,743 7,342,262 and foreign patents. US and Foreign patents pending. All Rights Reserved. 050-7633 Rev A 10-2008 Dimensions in Millimeters and (Inches) |
Price & Availability of APT150GN60LDQ4 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |